Security systems two roll mills

Two roll mills can be dangerous machines to work with.
To make working with the machines as safe as possible we equip them with a safety system.
At the moment we have two types of systems available.
Stop wire
On all our motor powered machines we place a stop wire in front of the rolls. This is our standard safety equipment.

Stop wire

The stop wire in front of the roll opening has it’s advantages compared to the full coverage protection. The biggest advantage is the freedom of movement around the rolls.

When the stop wire is pressed the machine will stop rotating the rolls. To be able to continue working all operating buttons have to be released first. When all controls are released the machine is ready for use again and can be started by pressing for instance the foot pedal switch forward or reverse. When the stop wire breaks or when it is sabotaged the machine won’t function at all.

The stop wire is equipped as standard safety device for the two roll mills MW-10, MW-20 and MW-20 HV.

Full coverage protection

Door plaatsing van dit systeem is de volledige inloopopening van de machine afgeschermd.

Door bediening van het voetpedaal is het mogelijk de afscherming een paar seconden te openen. Als de afscherming geopend is zal de machine op een zeer laag toerental blijven draaien. Dit toerental is voldoende om het te mengen materiaal in de machine aan te nemen. Als het voetpedaal losgelaten wordt zal de afscherming sluiten en is het mogelijk de machine weer op een bedrijfssnelheid te gebruiken.

Aan de achterzijde van de machine wordt voor de inloopopening van de rollen een draaibaar scherm geplaatst. Achteruit draaien met de machine zal alleen werken indien dit scherm omhoog (voor de inloopopening) gedraaid staat. Bij vooruit draaien kan het scherm naar benden geplaatst zijn waardoor de machine aan de achterzijde nog steeds volledig toegankelijk is.

Voor dit systeem is een persluchtaansluiting vereist.

De siliconenwals type MW-10, MW-20- en MW-20 HV zijn, tegen meerprijs, uit te rusten met dit systeem.

Full coverage protection
Closed situation
Full coverage protection
Opened situation

MW-10 BRDS safety system

We have designed this safety system especially for the two roll mill MW-10.

Under the bottom roll of this machine a red bar/handle is situated. This system is designed to take away the pressure between the rolls and activate the emergency stop once pressed.

MW-10 BRDS safety system
Safety system designed especially for the MW-10 two roll mill