The silicone laboratory for the professional
Dijatec Machinebouw manufactures two roll mills for the mixing of silicones and polymers. All HCR’s up to 90° Shore A can be mixed with this machine. Maximum mass is approximately 0,5 kg. for this machine, depending on the hardness of the HCR. This machine is developed to be used on a workbench. In front of the Gap between the two mixing rolls, a wire is situated that will cause the machine to stop when pressed.
All functional buttons are hold to run executed.
For applications where personnel operates the machine, Dijatec Machinebouw can build up a Guard in front of the Gap between the mixing rolls that fully guards the entrance. A patent for this system is applied for. When this guard is part of the machine, compressed air to operate the guard, is a necessity.
All functional buttons are hold to run executed.
For applications where personnel operates the machine, Dijatec Machinebouw can build up a Guard in front of the Gap between the mixing rolls that fully guards the entrance. A patent for this system is applied for. When this guard is part of the machine, compressed air to operate the guard, is a necessity.
High quality chrome finish
The high quality chrome finish layer on the rolls makes working easier
Small but powerful
This machine is small but has enough power to finish your job
Download information
Download the full product specifications as a PDF form
Technical specifications
Electrical connection: 230 Volt, 1 phase and ground
Installed power rating: 0,5 kW
0 Volt safety
Standard workheight: workbench height + 300 mm
Width of the rolls: 400 mm
Diameter of the rolls: 100 mm
GAP minimum/maximum: 0 – 15 mm
Rotation speed: variable from 1 to 11 RPM
Machine weight: 170 kg
Dimensions: D x W x H: 555 x 685 x 530 mm
Installed power rating: 0,5 kW
0 Volt safety
Standard workheight: workbench height + 300 mm
Width of the rolls: 400 mm
Diameter of the rolls: 100 mm
GAP minimum/maximum: 0 – 15 mm
Rotation speed: variable from 1 to 11 RPM
Machine weight: 170 kg
Dimensions: D x W x H: 555 x 685 x 530 mm
Color
The standard frame of this machine is powdercoated in RAL 5026 (dark blue metallic).
Plating of the machine is powdercoated in RAL 9001.
The machines can be delivered in any color of your own preference (additional charge).
Plating of the machine is powdercoated in RAL 9001.
The machines can be delivered in any color of your own preference (additional charge).
Standard equipment
Optional extras
Have a look at our other silicone mixing equipment
Hand operated two roll mill MW-06
Lightweight hand operated two roll mill
Two roll mill MW-20
Electrical two roll mill model MW-20. Used for mixing 500 to 1300 grams of material
Two roll mill MW-20 HV
Ergonomic design thanks to electrical height adjustment
Two roll mill HW-30
Horizontal two roll mill for mixing up to 6,5 kg of material